GGR STENCIL CUTTING MACHINES 


 

GGR STENCIL CUTTING  MACHINE   is  a   rugged, hand - operated  equipment   designed  to  cut STENCILS with equal spacing and parallel lines, of any length, on  STENCIL BOARD for MARKING on outer transport packages like cases, cartons, crates etc. with changing information.

All  one  has  to  do  select  the  letter  on  the  READING DIAL and press the HANDLE downward effortlessly till it cuts the board. The  unit  is  fitted with  automatic advance mechanism which advances the STENCIL BOARD by exactly one pitch on every punching.
40 Characters
LETTERS                      
FIGURES                      
(.) full stop
(') apostrophe
(/) oblique           

 TOTAL CHARACTERS
Kindly note for figures 1
and 0 you can use letters I and O


: A tO Z                  26
: 2 tO 9                    8
  (,) comma
  (-) dash
  (&) and                 6
                               ___
                                40
                                   
VERSATILE:
Marking  with  GGR   Stenciling  System is a 
unique combination of marking on different
products which    covers    most     marking  areas     in   a   neat,   clean and  organised manner.

You can mark on most surfaces ...

From porous to non porous surfaces ...

EASY & FAST

GGR STENCIL CUTTING MACHINE increases the efficiency of your finishing/despatch/ packing/shipping  department.  
It  takes just three minutes to  cut a four/ six  line  stencil efficiently and effortlessly. 
Stencils  once  cut  canbe used and stored 
and even re-used again and again.

EASY OPERATION & 
NO MAINTENANCE

Very simple to operate.  This  machine  has a
very comfortable handle, free hand spinning
wheel and easy  to  read  viewing dial  which 
eliminates fatigue while operating.

Only Monthly Oiling
> Just seven moving parts
> Thrust bearing assembly for smooth movement of die carrier.
> All unbrako socket screws/fasteners/accessories.
> MRF vapocure P.U. paint finish (Color : Champagne).
> Specially anodised aluminium easy to view reading dial.
> Handcrafted steel punches/dies, closely matched tempered & surface ground.
> Punches are specially tapered for smooth cutting.
> All components of grade - 1 quality are used to last & last ...
" Each Machine Cuts Individual Size Characters Only."
STANDARD SIZES SPECIAL SIZES

1"(25.4 mm) machine cuts this size Stencil from one to four lines, any length on Stencil Board 7" wide. 13.5  Characters Per Foot.

7/8" (21mm) machine cuts this size Stencil from one to four lines, any length on Stencil Board 7" wide.
14.5 Characters Per Foot.

3/4" (19 mm) machine cuts this size Stencil from one to four lines, any length on Stencil Board 7" wide. 16 Characters Per Foot.

5/8" (16mm) machine cuts this size Stencil from one to five lines, any length on Stencil Board 7" wide.
18 Characters Per Foot.

1/2" (50.8mm) machine cuts this size Stencil from one to six lines, any length on Stencil Board 7" wide. 22 Characters Per Foot.

7/16" (11mm) machine cuts this size Stencil from one to seven lines, any length on Stencil Board 7" wide.
28 Characters Per Foot.

1/4" (6.5mm) machine cuts this size Stencil from one to ten lines, any length on Stencil Board 7" wide. 36 Characters Per Foot.
Special size machines can be tailor made as per your specific requirements.
DO NOT SCALE

STANDARD    SIZES

SIZE

MODEL
NUMBER

CHARACTERS PER FOOT MAX.
  NO.  
OF LINES
LENGTH IN
INCHES
WIDTH IN
INCHES
HEIGHT IN
INCHES
WEIGHT IN
 KGS.
SHIPPING
WEIGHT
  IN    
KGS.
 SHIPPING
  BOX
DIMENSIONS

1" (25mm)

SCM-1000

13.5

4

23"

17"

12"

75

125

29"x25"x20"

3/4"
(19mm)

SCM-750 16 4 23" 17" 12" 75 125 29"x25"x20"
1/2"
(13mm)
SCM-500 22 6 23" 17" 12" 75 125 29"x25"x20"

1/4"
(6.35 mm)

SCM-250

36

10 23" 17" 12" 75 125 29"x25"x20"

SPECIAL     SIZES

SIZE

MODEL
NUMBER

CHARACTERS
PER FOOT
  MAX.
   NO. OF LINES
LENGTH IN
INCHES
WIDTH IN
INCHES
HEIGHT IN
INCHES
WEIGHT IN
   KGS.
SHIPPING WEIGHT IN KGS.
SHIPPING BOX DIMENSIONS

7/8" (22mm)

SCM-875

14.5

4

23"

17"

12"

75

125

29"x25"x20"

5/8"
(16mm)

SCM-625 18 5 23" 17" 12" 75 125 29"x25"x20"
7/16"
(11mm)
SCM-438 28 7 23" 17" 12" 75 125 29"x25"x20"

                                                                     
Due  to  GGR's  policy of continuous development , these specifications are subject to change without notice
.
              FREE   ACCESSORIES

    1/6    1 No. dust cover.
    2/6    200 Nos. double side poly-laminated  oil stencil 
               boards of 7" x 22" Sizes.
    3/6    6 Nos. round stencil brushes No. 12.
    4/6    1 Kg. tin oil stencil ink (black)
    5/6    1 Set operating instructions.
    6/6    1  No. stainless steel cleaning hook        
Free  Accessories Box Dimensions:
23" x 10" x 8"


Free Accessories Box Weight:
20 kgs